Remphos 12 Watt, 48" T8 5000K Bright White LED Hybrid Bulb, Works With or Without Ballast

SKU: RPT-B-TOTALTUBE-T8-G3-4FT-850 | Ordering Code: RPT-B-TOTALTUBE-T8-G3-4FT-850

Printer friendly

$12.29each

Add to Cart

Save to BulbTrack

Quickly and easily order the products you have purchased in the past or plan to order in the future by simply adding them to your My BulbTrack page.

Once a product has been added to My BulbTrack, ordering it is as easy as entering the quantity or clicking on the product image. You can even add notes to each product to record where it is used in your business or home.

In StockReady to ship

Add 9 to your cart to get free ground shipping *

Options

Bulb Color

Color Temperature Guide Bright White Cool White Neutral White

Product Highlights

Estimated life of 91.3 years based on 3 hours use per day
No lead or mercury means easy and environmentally safe disposal

Description

Lighting Facts Per Bulb

Brightness 1860 lumens

Estimated Yearly Energy Cost $1.45

Based on 3 hrs/day, 11¢/kWh

Cost depends on rates and use

Life

Based on 3 hrs/day91.3 years

Light Appearance

WarmCool

5000 K

Energy Used12 watts

DLC
Listed

Remphos TOTALTUBE G3® T8 LED 5000K bright white 12 watt bulbs works with or without a ballast. The smart internal driver is compatible with most fluorescent ballasts, or remove the ballast and power directly with 120-277 AC line voltage. The new G3 SMARTSENSE -TLED INTELLIGENT SAFETY SYSTEM switch-less technology provides the safest possible installation that prevents any risk of electricity flowing from one end of the tube to the other and also prevents against "socket to lamp pin" electrical arcing. Can be used in lensed recessed troffers.

Two Methods of Installation:

UL Type A plug & play compatible with most fluorescent instant start ballasts
UL Type B Double-End 120-277V ballast bypass installation using non-shunted or shunted sockets with power applied to both ends of the tube

When connected directly to line voltage (120-277 VAC) this lamp must be wired for double-ended power. This means the line wire (typically the black wire) and the neutral wire (typically the white wire) must be connected to each end of the lamp.

Works with or without a ballast. Compatible with most instant-start ballasts. Power to the fixture must be turned off before replacing the lamp. Call one of our Lighting Specialists for details at 888.455.2800.
Direct replacement for:
- F32T8 32W
- F32T8 30W
- F32T8 28W
- F32T8 25W
Instant on, no flicker or buzz
Fits into existing linear fixtures
Emits virtually no UV rays or IR
Glass-free for use in food areas and refrigerated food displays
To be used with shunted or non-shunted lamp holders
Suitable for damp locations

Full Specs

Brand	Remphos Technologies
Product Line	TOTALTUBE
Energy Used A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.	12 Watts
Volts A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.	120-277
Base The end (or ends) of the lamp that fits into the socket.	Medium Bipin
Wiring Wiring configuration a bulb can work with. Can be single-ended, double-ended or both.	Double Ended
Bulb Shape The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".	T-8
Bulb Color The color of the light produced by a bulb	Bright White
CRI Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.	85
Color Temperature (Kelvin) An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).	5000
Brightness (Lumens) A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.	1860
Bulb Finish The surface finish of a bulb, which may affect the quality of the light emitted.	Opaque

Bulb Technology The technology implemented by the bulb, e.g. incandescent, halogen, LED	LED
Average Rated Life (hr) A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.	100000
Operating Temperature (°F) The ambient temperature in which the product can safely operate.	-22 to 104
Beam Angle (°) The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.	240
Bulb Power Type Defines how a lamp is powered, whether it needs a ballast or not, or can use either	Hybrid
Length (in) Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.	48
Diameter (in) Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.	1
Socket Type Type of socket a linear lamp is compatible with, whether shunted, non-shunted or both.	Shunted or Non Shunted
Warranty	5 year limited
Damp Location Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment	Yes
DLC Listing Approved by the DesignLights Consortium, a collaboration of utility companies and regional energy efficiency organizations. Approved products meet the consortium's standards for ensuring high-quality, energy-efficient lighting design. There are three categories, Standard, Premium and Horticultural, plus Luna for light-pollution minimization.	PL4C09IYD7MS Standard