Green Creative Non-Dimmable 8W Horizontal 2 or 4 Pin 4000K G24 LED Hybrid Bulb

SKU: 98402 | Ordering Code: 8PLH/840/HYBM | UPC: 045079984028

Green Creative 98402 8PLH/840/HYBM Non-Dimmable 8W Horizontal 2 or 4 Pin 4000K G24 LED Hybrid Bulb

Printer friendly

$19.99each

Add to Cart

Save to BulbTrack

Quickly and easily order the products you have purchased in the past or plan to order in the future by simply adding them to your My BulbTrack page.

Once a product has been added to My BulbTrack, ordering it is as easy as entering the quantity or clicking on the product image. You can even add notes to each product to record where it is used in your business or home.

In StockReady to ship

Add 5 to your cart to get free ground shipping *

Options

Bulb Color

Color Temperature Guide Cool White Neutral White Soft White

Product Highlights

Estimated life of 45.7 years based on 3 hours use per day
No lead or mercury means easy and environmentally safe disposal

Description

Lighting Facts Per Bulb

Brightness 950 lumens

Estimated Yearly Energy Cost $0.96

Based on 3 hrs/day, 11¢/kWh

Cost depends on rates and use

Life

Based on 3 hrs/day45.7 years

Light Appearance

WarmCool

4000 K

Energy Used8 watts

The horizontal mounted non-dimmable PL LED lamp from Green Creative is a line driven or plug 'n play LED replacement for CFL downlights with a 2-pin or 4-pin G24q, GX24q, G24d or GX24d socket. Can be used with either a magnetic ballast or line driven installation without a ballast. Not compatible with electronic ballasts. Compatible with 13W, 18W, 26W, and 42W non-lensed fixtures only. Not for use in enclosed fixtures.

Do not "hot swap" this lamp. Turn off fixture before replacing existing bulb. If the lamp does not light when the luminaire is turned on, remove the lamp from the luminaire. If the lamp or luminaire exhibits undesirable operation (buzzing, flickering, etc.) immediately turn off power and remove lamp.

Full Specs

Brand	Green Creative
Model Number	8PLH/840/HYBM
Energy Used A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.	8 Watts
Fluorescent Equivalent The total wattage of fluorescent lamps in a fixture that this fixture replaces.	26
Volts A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.	120-277
Base The end (or ends) of the lamp that fits into the socket.	G24q/G24d
Bulb Shape The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".	Twin Tube Alt
Bulb Color The color of the light produced by a bulb	Cool White
CRI Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.	80
Color Temperature (Kelvin) An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).	4000
Brightness (Lumens) A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.	950
Bulb Finish The surface finish of a bulb, which may affect the quality of the light emitted.	Opaque

Bulb Technology The technology implemented by the bulb, e.g. incandescent, halogen, LED	LED
Average Rated Life (hr) A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.	50000
Operating Temperature (°F) The ambient temperature in which the product can safely operate.	-4 to 95
Beam Angle (°) The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.	110
Bulb Power Type Defines how a lamp is powered, whether it needs a ballast or not, or can use either	Hybrid
Length (in) Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.	6.4
Width (in) For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.	1.3
Orientation The angle that the fixture can be mounted at	Horizontal only
Mounting	Horizontal
Warranty	5 year limited
Damp Location Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment	Yes