Satco 12 Watt 22" T5 4000K LED Bulb, Single/Double Ended, Ballast Bypass

SKU: S28694 | Ordering Code: 12T5/LED/24-840/BP/HO/SE-DE | UPC: 045923286940

Printer friendly

$15.59each

Quickly and easily order the products you have purchased in the past or plan to order in the future by simply adding them to your My BulbTrack page.

Once a product has been added to My BulbTrack, ordering it is as easy as entering the quantity or clicking on the product image. You can even add notes to each product to record where it is used in your business or home.

In StockReady to ship

Add 7 to your cart to get free ground shipping *

Product Highlights

Estimated life of 45.7 years based on 3 hours use per day
No lead or mercury means easy and environmentally safe disposal

Description

Lighting Facts Per Bulb

Brightness 1450 lumens

Estimated Yearly Energy Cost $1.45

Based on 3 hrs/day, 11¢/kWh

Cost depends on rates and use

Life

Based on 3 hrs/day45.7 years

Light Appearance

WarmCool

4000 K

Energy Used12 watts

NSF
Certified

Satco non-dimmable 22" single-ended or double-ended power T5 LED is an energy saving, linear replacement for a 24" 14 watt T5 fluorescent lamp. It is line driven so the existing ballast must be bypassed.

Existing ballast must be bypassed when present.

Requires non-shunted G5 mini bi-pin lamp holders
Non-dimmable. Do not use with dimming ballasts
Glass construction with PET coating
NSF approved
Instant on, no flicker or buzz

Full Specs

Brand	Satco Products, Inc.
Model Number	12T5/LED/24-840/BP/HO/SE-DE
Energy Used A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.	12 Watts
Fluorescent Equivalent The total wattage of fluorescent lamps in a fixture that this fixture replaces.	14
Volts A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.	120-277
Base The end (or ends) of the lamp that fits into the socket.	Miniature Bipin
Wiring Wiring configuration a bulb can work with. Can be single-ended, double-ended or both.	Single or Double Ended
Bulb Shape The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".	T-5
Bulb Color The color of the light produced by a bulb	Cool White
CRI Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.	82
Color Temperature (Kelvin) An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).	4000
Brightness (Lumens) A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.	1450
Bulb Finish The surface finish of a bulb, which may affect the quality of the light emitted.	Opaque

Bulb Technology The technology implemented by the bulb, e.g. incandescent, halogen, LED	LED
Average Rated Life (hr) A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.	50000
Operating Temperature (°F) The ambient temperature in which the product can safely operate.	-4 to 104
Beam Angle (°) The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.	240
Bulb Power Type Defines how a lamp is powered, whether it needs a ballast or not, or can use either	Ballast Bypass
Length (in) Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.	22.5
Diameter (in) Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.	0.75
Socket Type Type of socket a linear lamp is compatible with, whether shunted, non-shunted or both.	Non Shunted
Warranty	5 year limited
Damp Location Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment	Yes
Food Equipment Certification The NSF (National Science Foundation) establishes minimum food protection and sanitation requirements for the materials, design, fabrication, construction and performance of food handling and processing equipment. The ETL (Edison Testing Laboratories) Mark is proof of product compliance to North American safety standards.	NSF
Coated The bulb has been safety coated.	Yes
Shatter Resistant Makes glass fragments less likely to spread in the event that the glass envelope of the bulb is compromised.	Yes